How to Install the SlydLock Fireplace TV Mount
Installing a TV in a fireplace nook has never been easier than with the SlydLock Fireplace Nook TV Mount. Slydlock is a low profile tilting bracket that accommodates flat panel plasma, LCD and LED TV’s from 32-70″ wide.
The following step by step installation guide will familiarize you with our product demonstrate how easy it is to install our fireplace TV mount. Please give us a call if you have any questions about installation or our product in general.
Step 1: Bracket Setup
This bracket is very easy to setup, measure and install. You can place the bracket in the nook and set the side rails in a matter of seconds.
The adapter plates are secured with 8 Carriage bolts that can withstand the force of 400 lbs. each. Just tighten the locking nuts on each bolt and you are ready.
The mount will accommodate openings from 32″ to 52″ wider and locks in place every 1/8 inch for 100% accuracy.
Step 2: Mounting the Bracket
After the mount is calibrated for the nook, all you have to do is level and mount according to depth. The fireplace nook mount has adjustments on the side rails that allow the bracket to be secured at various depths.
There are also pass through holes for all wires and cables to be secured for a clean finished installation. Removal is also as easy as installation.
The bolts will remove from the side rails and only a couple holes to patch. No more stud (framing) removal and bulky debris to dispose of.
Step 3: Installing the TV
Finished product is now secure and ready for setup. The TV can be mounted at various heights as well. Customer wanted access under the TV to add a cable box and possible Home Theater System.
This version of the mount was a 5 degree tilt option. The bottom of the TV sat 1/8 of an inch from the nook and was as low profile as could be imagined. No matter what angle you were at in the room all you could see was the TV flush with the wall
This saved our installation team about 1.5 hours of labor time building framing and making a mess during construction of older systems.
The Fireplace Nook Mount is available in a Low Profile Tilt or Flat Bracket option. This gives even more versatility and custom installation options.
Enjoy the Fireplace TV Mount
Amazingly the Slydlock mount has incredible stability and able to hold this Samsung LED 55″ TV only 1/8″ from the wall.
Tilting bracket tilts forward 15 degrees for comfortable viewing areas and hiding all unnecessary space behind the LCD/LED/Plasma screen. Don’t settle for a smaller TV, let the Slydlock help you get the TV you have always wanted.
Customers have had to settle for a smaller TV to fit in a fireplace nook with very few options. Equipment in most cases had to be relocated to new locations to accommodate the homeowner wants and desires in home entertainment.
The SlydLock mount will fix to the outside frame of any fireplace nook and support the load of any LCD/LED/Plasma TV up to 70″.
Home owners will be able to get any size TV up to 75″ desired, while keeping use of the nook and allowing for all equipment to stay in it’s existing location. Mount is adjustable to fit an opening 32-52″ wide!